Log In

Inicio de sesión

¿Ha olvidado la contraseña?

Subtotal: €0.00

DJI Zenmuse Z15 5D (HD)

Disponibilidad: En existencias

Precio: 1.699,00 €

Special Price 1.399,00 €



High precision brushless gimbal for Canon 5D Mk III
Clic para ampliar y mover
  • Another Evolutionary 3-axis Professional HD Gimbal
  • Built for the Panasonic GH4/GH3
  • HDMI-HD/AV Module
  • 3-axis Rotation Control
  • A Total Solution
  • Multiple Control Modes
  • Gimbal Servo Drive Module
  • Built-In Independent IMU Module

The DJI Zenmuse Z15-5D Gimbal, based on the technology of the Zenmuse Z15 series gimbal, inherited its predominant strength/weight ratio because of its unique structural design. This release marks another breakthrough in gimbal systems and the precision range of the control angle is within ±0.02°. When used with DJI A2 professional flight controller and an Octo-copter, it will remain stable and precisely with the highest level of stability in controlling any camera equipment even if the aircraft is in strong wind or at high speed. Undeniably, it is the top choice in professional filming or aerial photography.

In order to ensure the gimbal functions at its best and submits nothing but industry level images, DJI provides a customized Gimbal in accordance with the latest in camera technology… the Zenmuse Z15-5D Gimbal is customized for the Canon 5D Mark III and Canon 5D Mark II for example. The Canon 5D series camera has been providing an unparalleled customer experience as it offers excellent video quality and a variety of recording formats, bit rates and frame rates… and with up to 1920×1080/24P shooting ability, the Canon 5D is a perfect camera for all in the world of aerial photography.

The 3-axis Zenmuse Gimbal system has a creative mechanical design. The control method is simple and easy to use as the movement range of the transmitter stick has direct control over the relative rotation speed. The tail potentiometer greatly increases control, stability and precision, and the internal slip rings avoid needlessly complicated wiring. Both the power and signal lines are integrated into the tubes of the Gimbal, which presents a completely unhindered control axis without limitation providing a maximum Yaw of ±360°, a maximum Pitch of -120°to +15°and a maximum Roll of ±25°.


Built-In Functions
  • Three Working Modes
    · Orientation-locked control
    · Non orientation-locked control
    · FPV mode (Reset)
  • Built-in independent IMU module
  • DJI gimbal special servos drive module
  • Wireless video transmission supported
  • Camera shutter control supported
  • Wide range voltage input supported
  • S-Bus/PPM Receiver supported
Supported Camera
Current Supported Lens
CANON EF 24mm f/2.8 IS USM
GCU Input Power
4S~12S LiPo Battery
Control Requirement
Four spare receiver channels at least
Assistant Software System Requirement
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mechanical & Electrical Characteristics
Working Current
Static current: 200mA (@25V)

Dynamic current: 400mA (@25V)

Locked-rotor current: 4A (@25V)
Operating Temperature
-10°C ~ 50°C
204mm × 242mm × 264mm
GCU Weight
GCU Dimensions
64.2 mm ×34.1mm ×19.5mm
Working Performance
Load Weight (Reference Value)
2615g(5D MARK II with SD Card & Battery & CANON EF 24mm f/2.8 IS USM Lens)
2664g(5D MARK III with SD Card & Battery & CANON EF 24mm f/2.8 IS USM Lens)
Controlled Angle Accuracy
Maximum Controlled Rotation Speed
Pan axis: ±90°/s

Tilt axis: ±130°/s

Roll axis: ±30°/s
Controlled Rotation Range
Pan axis control: ±360° continuous rotation

Tilt axis control: From -90° to +15°
Roll axis control: ±25°

Información adicional

Fabricante DJI Innovations