Log In

Inicio de sesión

¿Ha olvidado la contraseña?

Subtotal: €0.00

ESC KDE XF-UAS35

Disponibilidad: En existencias

80,00 €
O BIEN

Descripción

High performance ESC system
Clic para ampliar y mover

The UAS series is compatible with 2S - 8S LiPo (8.4V to 33.6V) power systems - allowing for the next level of performance and efficiency for your sUAS and Multi-Rotor applications.

The series is tuned and optimized for the KDE Direct XF Multi-Rotor Brushless Motor Series, for simple plug-and-play operation. No additional throttle calibration is required for most applications and settings are factory programmed.

The new KDE Direct XF UAS Multi-Rotor Electronic Speed Controller (ESC) is optimized for multi-rotor applications and utilize a proprietary algorithm for up to 600Hz refresh rate control and high-speed response to the flight system commands. Dynamic PWM and Motor Advance Timing algorithms are used for optimal flight performance. The series is specifically designed and optimized for the KDE Direct XF Multi-Rotor Brushless Motor Series. For maximum stability and performance of the flight controller, the system is tuned to react almost instantaneously to the flight commands and XF Brushless Motor response capability.

ESCs include 200°C, 14 AWG silicone-wire power leads and 15 AWG silicone-wire motor leads with dual ф4.0mm and ф3.5mm 24K matching Bullet Connectors.

Programming: Proprietary Algorithm, 600Hz Refresh, Dynamic Advance Timing

Includes:

  • Two (2) KDE Direct XF ф3.5mm 24K Bullet Connectors (Pair, Male/Female)
  • Two (2) KDE Direct XF ф4.0mm 24K Bullet Connectors (Pair, Male/Female)

Full Specifications:

Refresh Rate 600 Hz (50 - 600Hz Adaptive)
Maximum Current* 60 A (5s Burst)
Maximum Power 1,780 W (5s Burst)
Continuous Current* 35+ A
Continuous Power 1,040+ W
Maximum Efficiency > 98%
Voltage Range 8.4 V (2S) - 33.6 V (8S)
Internal BEC None (Opto-Isolation)
Maximum RPM 240,000 rpm (2-Pole)
PWM Rate 16 kHz Dynamic Algorithm
Advance Timing 22° - 30° Dynamic Algorithm
PCB Size 25 mm (W) x 42 mm (L)
ESC Weight 24 g (46 g with Wires/Bullets)
Power Leads 14 AWG, 200°C
Motor Leads 15 AWG, 200°C
ESC Lead 22 AWG, 3-Wire JR
Power Connects ф3.5 / ф4.0mm Matched Pair
Motor Connects ф3.5mm Female

*: ESC requires consistent airflow (5 mph or greater) across the heatsink to maintain continuous and maximum amperage ratings during operation. Increasing airflow or adding additional cooling can further increase the capabilities of the controller and extend the lifespan of the critical internal components.

Información adicional

Fabricante KDE

Te podría interesar también: